Best Baking Oven Thermometer

👤This was used twice. The meat was cooked to a temp of about 90 degrees when it was given the reading. The results were the same after following the directions. We bought this based on the reviews, but were disappointed and returned it. The customer service is excellent. They reached out to me after they noticed my review. They sent a free replacement as well as refunding the entire cost. The replacement works better than the old one. The first one must have been bad. I am very happy with the new Thermometer.

👤When I was working, the Thermometer was working well, but now it is having problems. It only works intermittently and often shows all the numbers on the thermostat reader. I changed the batteries, but they are still malfunctioning. I only used it 10 times. I bought a Webber Thermometer 5 years ago and it still works. I would give it 5 stars if it was reliable. The company immediately contacted me after I wrote the review and told me that the product had a lifetime warranty. The replacement showed up a few days later and I was very happy. Great customer service.

👤I have used the Kizen instant read thermometer for a few months and have mixed results. It is easy to use the thermometer. It's easy to clean. The magnetic backing makes it easy to stick places and not have to reach to find it. The Kizen instant read thermometer is not at all "instant" or even fast, which is a problem for me. I wanted a very fast temperature. I was able to get quick readings while holding the door open. I like to cook with heat and smoke so I picked the Kizen because it claims to read in less than 2 seconds. The Thermometer climbs slowly for a short time before giving a reading. Watching it climb and then probing different areas in the meat, or different pieces of meat, really is a killer. If I have to probe 5 times and it takes 7 seconds per probe, I have the smoker door open for more than half a minute. I had hoped that the door would open for a third of the time I had bought it, but if it took just a few seconds, I would have the door open for a third of the time. I'll continue to use open pan grilling but I'm going to be looking for something else.

👤I have only had this product for a month and it already has condensation over the temperature. The money was wasted. It is not the same as it says in the picture, and it is not the same temperature inside my house.

👤My husband loves it, he was given a bbq basket. He just tested my daughter's bath and it was 102.4 degrees.

👤We were very pleased with the Kizen meat thermometer. It was perfect for cooking a 16-pound prime rib on Christmas. Customer service has been excellent. I received a follow up email with suggestions for most effective use and another reminding me that the product is under warranty should we have any issues. We would recommend both the product and seller.

👤I didn't have high expectations for this thermometer, as there are 487 knock off versions of the same thing. After using both the instant read and leave-in probe for a few months, I have decided to stop using it. Wow, what a great price for a small device. It is easy to use and reads very fast. The beer opener is the cherry on top, because of the bonus points given for the magnets. I do a lot of grilling, smoking and temp sensitive baking/roasting so this is an important tool to have. I think I should buy a second one and put it away whenever this one gives up the ghost because of the reliable "go to" tool.

👤I ordered this for certain features. Most don't have the ability to recalibrate. It's useless if you're not accurate. I liked the dual probe option. Convenient! This is a great temperature. The directions are easy to follow. The wire that holds the probe in the oven is sturdy and can close the door completely. Plug wire You have a handheld probe. When food temperature is reached, you can set a timer for when it will be ready. It takes seconds but it's not an instant read. It's a great buy.

👤I returned the original item because it wouldn't calibrate. The replacement was sent the next day. I put the swing-out probe into boiling water and then into an ice bath to get the temperature. I used the feature to set the temperature in the ice bath. I put the probe back into the water and it read 208F, which is close to the actual temperature. It seems easy to use. I would recommend this to a friend. The product seems well constructed, good solid feel in the hand, and below text was submitted on 17 Jan 2021. I like magnetic storage and external probe fesryres. The probes were dipped into boiling water and the temperature was accurate for kitchen use. The tip was dunked into a bath of ice water and the temperature was read as 39.9F. I tried to calibrate the unit by holding the Cal button until the instructions were displayed. The display seems to give an error message. It seems like an error, but I am not sure what it means. The display is supposed to flash numbers that can be adjusted to 32F in order to calibrate it to ice water bath. I will return this item. If you have one of these, you should check the readings in the ice bath and boiling water.

👤I overcooked my pork and chicken. I wanted to protect myself and others from over cooking, but I didn't realize how it was happening. I have stopped cooking when internal temperatures reach 160 % or so. Everything is more tender. The probe is long enough to be used with the digital reader on the counter. The wire doesn't interfere with the oven seal.

👤I am really happy with this purchase. 1-Magnetic. I don't have to dig to find it because it sticks to the stove. The alarm feature will let you know when your food reaches the temp you set so nothing gets over-cooked. We bought a few months ago and would buy again. The value is great.

👤I bought this thermometer a couple years ago and it worked great at first, but I was looking for a more accurate one and it wasn't there. It has acted up over the past 6 months. It would be difficult to turn on if it turned off while taking a reading. After pulling the battery and re-inserting a couple of times, the screen would eventually work after flashing on/off rapidly when trying to use it. It's hard to turn on the thing and it often won't stay on for long enough to use. I have replaced the battery on more than one occasion, but this is not a problem because the behavior remains the same. Something is not right with the unit inside. I received a reply from Sarah within hours apologizing for the problem and asking to verify my home address for a replacement unit. I thought I did a good job. This is awesome!... It's been 3 months. I've sent follow up emails asking for the status to be ignored. I don't write negative reviews but I can't stand false advertising. If you have a problem, you might not get this company to honor their warranty. Too bad...

👤I have had a Thermapen for over 20 years and it has been great, but it is starting to fail as it is hard to get a connection as you rotation the pen to turn it on. I was looking for a new Thermapen or alternative. I decided to try it out for the low price of $20 on Amazon. I compared it to the failing Thermapen when it arrived. The two pens were within 1 degree of each other. The Thermapen was 3 degrees low at room temperature, while the Alpha Griller pen was accurate. Both pens were within a degree or two of the stabilizing readings within 3 seconds. They did the same thing. The Thermapen comes in a variety of colors and designs. The Alpha Grillers pen does not. Functionality is the same. The Alpha Grillers pens have nice features like the backlight, calibrate, hold, and max/min that the Thermapens don't have. My Thermapen lasted for over 20 years, but the Alpha Grillers pen was less expensive. I don't know how long the Alpha Grillers pen will last. I bought some Alpha Grillers pen for gifts and am happy with it.

👤The thermometer is easy to use and what I expected. The probe came loose when it was cleaned with a sponge. The probe was pulled out of the body of the thermometer. One of the wire leads can't be re threaded because it extends down to the tip of the probe. The thin copper wire cannot be passed through a seal which is inside the probe. The return window is only one month, so I'm not able to get a replacement. This product currently has limitations on submitting reviews. Unusual reviewing activity is one of the reasons for this.

👤For years I have carried a small yellow probe in the arm pocket of my chef's coat, they die after the third time they are forgotten and washed. This one won't fit in my arm pocket, and that's not a bad thing. I gave this one a try because I was tired of spending all the money on the little Yellow Thermometers and kitchen staff. The greatest thing about this thermometer is it's both magnetic and has a hook on the side of the fridge to hold it. It's large and easy to see, and I bought three to hang in strategic places where they will be most needed in my restaurant. When the health inspector shows up, there is a top notch working Thermometer right where it's supposed to be, no more employees forgetting them at home, no more running through the washing machine, and most of all, there is a top notch working Thermometer right where it's supposed to I used it to find out that my fryers were too high, and that will save me the cost of the three thermometers within the next month, and give me at least one more day twice a week before I need to change the oil in my fryers. I have only had them for a week, so I can't rate them well, but I keep batteries around anyway. That's not the most of my concerns. I like it a lot. I don't think you're going to waste any money buying a thermometer with 40 years of cooking experience.

👤We tested it with a couple of instruments and it works. The stand is too small and the thermometers fall through the oven rack if poked. The hook top is useless because there is no oven to hang it from, and you don't want to hang it from the rack because it won't be centered in the oven. This one is more readable than others.

👤I ordered 3 for my home inspection business. I put all 3 in the oven. The photo shows that one of them is 12 degrees lower than the other two. Since they don't take up as much space as expected, it's nice and they have less room on the dial for temperature reading. These will work if that's the case.

👤I had to give it 4 stars for accuracy, as the reason I bought it was to know the temp in the fridge and freezer. I'm happy with it.

👤The gas stove was not heating to correct the temp, but the temperature proved correct.

👤I got my old oven thermometer back together after it fell out of its frame, because it was spattered with years of grease. I got it when I saw this one at a reasonable price. I use it as a stand for my old one, which is easier to read, even upside down and spattered.

👤I wanted a new deep freeze. I have a digital unit that is dead on and I have checked it a few times. The price was fair. I would buy another if I needed one.

👤I suspected that my oven wasn't heating up. The guy read 250 degrees when the oven reached 350 degrees. I need to check my temperature sensor, but it's for another day. If you put something in the oven, the hook will knock the temperature off the rack. If you have a built in oven, it might not be a problem if you have to grab it or almost stand on your head to read it, but for those of us.

👤The temperature was over 100 degrees. I compared its reading to an electronic device. The oven was set at 450 degrees. I am so upset over its poor quality that I am asking Amazon to give me a refund and remove it from its site. If the one you receive will be faulty, please avoid it.

👤It took a long time to be shipped, so I only gave it a 3 star. There were two delay notifications. It seems to work now that it has arrived.

👤My wife has been baking more recently. She had to extend the baking time on a lot of the things she was doing. The oven was 888-282-0476 I wanted to check it out. I waited for the oven to sound to tell me the oven was at the correct temperature after I set the oven to 400* f. After a good 10 or 12 minutes, the oven temperature was finally 400*f, after the notification sounded the temperature was only 300*f. The banana bread was burnt on the outside and doughy in the middle, and things weren't getting done in the prescribed time. The oven was not preheating.

👤I've used several oven thermometers, including the Model EOTI. I bought a new oven because I hated cleaning it and my old one was unreliable. I thought it was the oven because the portable temperature never went above 350. I decided to buy a new AcuRite just before buying a new oven because I wanted to compare it to the CDN. The oven was set to 425 degrees by me. The temperature was 350 degrees. My pastry came out perfect. I'll throw away the CDN and stay with the new AcuRite. Sorry Cook's magazine!

👤It is made in China. Don't be deceived! I did a search on Amazon for "Made in the USA" and it came up. If it was made in the USA, I would pay more for it. Imagine my surprise when I received a product with the words "Made in China" written on it. "Country of Origin: USA" is what the product description reads. That is false. People want to know where it was made. It is only designed in the US. It is made in China. People don't care what country it is in. If "country of origin" is used in a product listing, it must be added as well. The seller is trying to make it hard for you to find out where it is made because they know it hurts their business when customers know it's made in China. I'm returning my own. I will not do business with China. The oven was alarmed when it reached the set temperature after I hung the temperature from the middle rack. At that time, the temperature on the thermometer was at least 275 F. The door was not open. It took another 15 minutes for the temperature to reach 350 F.

👤There is a picture of junk. I used it once to check the accuracy of my oven. It stayed there forever, after it went to 450 degrees. I had to throw it away. You should spend a little more for a better thermometer.

👤The numbers fell off the dial. It is useless. I do not recommend buying this product. The paint that was used fell off the dial and now lies at the bottom of the product. You can save money by buying a different oven thermometer.

👤We really wanted to use it. As the temperature went up, the probes became over 30 degrees warmer than they were. We put the probe that came with our Traeger smoker on top of the cooker to see if it was hotter than 154 degrees. We had this for 34 days. I should have paid attention to the warranty. Very disappointed. This update is about the thermometer. I received an email from Enzoo customer service, they offered to replace our unit that we were dissatisfied with. I will adjust my review to reflect the great customer service I have experienced, so I can give them another try. I will update again once we have a chance to use the new thermometer. We really wanted to love it, so maybe this next one will. I was worried that we would have the same issues with our new thermometer after the first night of use. The new thermometer worked better after we used it on our Traeger. It's convenient to have the receiver in the house while the smoker is in the cold garage. The customer service that we received from Enzoo was excellent.

👤This thing is amazing. I worked in a calibration lab where we used the same techniques to check the accuracy of the thermometers, and it was unbelievably accurate on all 4 probes, and the WIFI receiver allowed you to monitor your cooking from the next room. I can use this in the kitchen because I am lazy and can use timer functions, accurate reading, 4 probes for 4 dishes, and as far as I am concerned it is a 5 Star item and an unbelievably low price.

👤I got a lot of emails when I contacted Enzoo about the issues I was having. I was being begged to change my review and make me feel bad for hurting their sales. I gave them another chance because I felt bad. They sent me a new one, but then asked me to update my review before I got the new one. I feel like Enzoo is lying about their reviews. They thought they could buy me out by giving me a new thermometer, but I don't care about money. I'm upset that I wasted my time testing a new thermometer that worked better than the first one, but still has some issues that I won't be using, because I actually care more about my time. I promised to update my review in exchange for the new thermometer, so here is my update. The new Thermometer they sent me did not have any issues. The signal is strong enough to reach me in my kitchen, garage, or the other side of my house. 2. All four probes are within 1 degree of my two other Thermpro thermometers. 3. I use the box it came in because my Thermpro TP-20S doesn't have one. 4. It has 4 probes, but after using my Thermpro TP-20S a few times, I've been able to manage with 2 probes, one for the biggest cut of meat and one for the bbq. The cons are 1. The second one still has issues when setting temperature levels, just like the first one. You have to double check your settings. It was annoying! 2. The alarm doesn't work in my tests if the temperature goes through the Hi or Low setting too quickly, and this is the reason I won't be using this thermometer. The deal breaker! The main reason for my interest in a multi-probe thermometer was to have one probe to monitor the high and low temperatures of my bbq/smoker for cooking a prime rib roast, which is not a cheap cut of meat. I used two cups of water, one hot and one cold. I applied the exact same test to my Thermpro TP-20S and it passed every single time. Why would I use a tool that doesn't work consistently if I already have one? It seems like a jump of 3 degrees within a few seconds through the alarm level is enough to cause the problem. The alarm eventually goes off within 6 minutes. This might not be an issue for some situations, but it still worries me and makes me not trust it. I don't want to be a tester for this company, I'm a software engineer by profession, and I have done a lot of detailed testing in my life, but I know that this should be a very simple bug to fix. I believe that this could have been a great thermometer, but it isn't ready for prime time. It has some serious bugs in its software and hardware that need to be fixed before it can compete with the Thermpro TP-20S. Avoid this product and save yourself some time. If you enjoy being harassed and shamed, you should avoid contacting Enzoo directly. I'm really disappointed in this product. I fell for the 80 5-star reviews in the first 2 months. Great idea. Terrible execution. The receiver rarely talks to the transmitter, and this causes the temperatures to get out of sync, and all the alarms are on the receiver, so it doesn't work right. Take a look at my photos. Even with fresh batteries, they got out of sync. If you don't plan to use the wireless feature or the alarm feature, this could work for you. I liked having 4 probes, but I was paying for alarms and wireless. I didn't like programming the temperatures for every probe. It would change my setting for probe 2 from prog to fish. There is pain in the butt. I'm going to try the best selling tp20 instead of returning this. I'm tired of testing for small companies.

👤I bought a TP-15 as I was getting into the "reverse sear" method of cooking steaks. The TP-15 was easy to read and a good value. The lady who cleans my house was interested in learning how to prepare meat this way, so I decided to give her my TP-15 and upgrade to the TP-16S, because I really liked the fact that I could leave the probe in and shut the oven door. The fact that I didn't have to open the oven door to cook the steak at 250 degrees was a great plan. I got a 12 ounce filet with sea salt and pepper on both sides, and I put it in the room at room temp. Once it hits 127-128, you pull that sucker out and then do your searing in a cast-iron skillet. She ended up eating the whole thing while she was here, because it worked perfectly and we were going to split the steak. She's happy with her TP-15 and I'm happy with my TP-16S, both of which have an extended 3-year warranty. I'm going to use this thermometer to cook a standing rib roast for the next holiday. I will recommend it to everyone.

👤The probe worked well. I probed washing instructions every time. The alarm goes off after 20 seconds after I put the probe into the steak, and I just took out the frig. It lasted only a week. There was a useless probe.

👤It is a good temperature but hard to use. Selecting a picture of the meat type is difficult and confusing. I prefer a simpler one where I just set the temp and go. I would like to have a place to wrap the cord nicely on the unit. It has a lighted display and is magnetic. I think it is accurate with the temperature. This one would probably not be bought again.

👤I am very happy with the easy to use ThermoPro. I like the preset temperature settings, but I also like how easy it is to set my own. I have used it when cooking steaks to medium rare and most recently while making yogurt. When the temperature reaches the set time, this Thermometer will sound, because I like to stir the milk at different intervals. I recommend this one for its value, features, and convenience.

👤I ruined a beautiful 1 1/2 inch Porterhouse on the first time I used this thermometer. The probe was inserted directly in the center and it kept reading 74 degrees. I said to myself that it wasn't right as it was taking way too long. The center was over 140 degrees, thanks to my old instant read stick thermometer. I tried it again in the oven and it worked. I learned from my first mistake that I should only use my old stick thermometer for the final sear in the iron skillet as it doesn't seem to work well when you need a quick reading and it's easy to overcook the meat if you are shooting for that perfect 130 degrees medium rare It won't turn off unless I remove the battery.

👤I bought two of them because I like my ThermoPro TP-08S and I expected it to be a great product. The warranty was a factor in my decision. I opened one and put it to use, comparing it to my Etekcity Laser Grip. The first marked difference is the smooth sureface of the TP30 case compared to the Laser grip. The batteries they take are different. The name of the product is ThermoPro. The laser grip is called the Laser Grip. 9v. The feature is the last. Etekcity Laser Grip 1080 does not have it. I use my laser grip in the kitchen to check skillet temperatures before cooking eggs and steaks. It's important to make sure my cast iron pancake griddle is at the right temperature. Depending on where you set the emissivity on the ThermoPro, the temperature reading between the two can be as much as 20F. I don't think this is a good idea to play with an emissivity feature. A procedure to calibrate the unit would be nice. I'm considering sending the TP30's back for a refund.

👤This gun works well for our pizzas in the wood-fired oven. We need to know the temperature of the stone and the interior of the oven in order to get a good crust. This unit does it.

👤I used a $500 tool 20 years ago when I was pulling tools on equipment. That one did not have an Emissivity adjustment. This one does. This is a good way to make money. The IR heat gun only sees shades of grey. Each shade of grey has a slightly different Emissivity. That's a funny word that means the combined energy. We want to see surface heat. The IR gun can read three types of heat. The true temp of an object is distorted by this. You know that the heat is reflected or absorbed. White and silver are hot. The heat is absorbed by dark colors. Even if you get the Emissivity setting correct. The heat is changed by the distance from the object. Your reading will be a bit off. The reading of the heat gun is affected by two variables. If you get within 5 degrees of the actual temperature with an IR heat gun, you are doing well. This is the best IR gun I have found in a long time. The heat is averaged in the area. The closer the better. The circular area tested is about 2 cm. The field is 3 cm at 36 cm, and it keeps growing. The iR gun averages the temperature in the field to calculate accuracy, so the farther away from the object the better. This tool is still useful. I used a heat gun to narrow down the problem. I found a heat gun useful. When things fail, they get hotter or colder than a similar part. I used the heat gun to compare two temperatures instead of looking for an exact temp. My expensive one was always a few degrees off. When oil passes the piston, the cylinders get hotter. The cylinder temps were compared to the bucket loader drift problem. The hotter one isn't being taken advantage of. Poor contact causes electrical connections to get hot. The exhaust manifolds can be checked to see if there is an engine miss. The problem might be the cold one. A neighbor lost power. I used my old heat gun to check the outlets. I found one hotter than the others. The outlet cracked when I pulled it apart and the wires came loose, which caused the outlet to melt. A heat gun test can use brakes and wheel bearings. I convinced the quarry maintenance department to check the conveyer belt roller temps. It became a daily check to find the bad rollers and change them on down time, instead of in the middle of the day, when 20 trucks are waiting to be loaded. The heat gun only gives a temperature of solid objects. Air, water, and Ice will not give a true temp with a heat gun. That's the Emissivity thing. When you have a problem with something, it's a good idea to check the temperature of the parts and look for one that is too hot or cold. This is a small heat gun. An IR heat gun in this price range won't be very accurate.

👤I bought this item because of the reviews. I used it to check the temperature of my Wolf oven, and it seemed to indicate that it was 15-20. I had the Wolf technician come out to do the testing. He used a thermocouple digital sensor and 2 Taylor mercury oven thermometers. The 3 of them all showed the same consistency, with the thermocouple sensor showing more accuracy on a second to second basis. At the best of times, the Rubbermaid was low. Tech told me that the spring based thermometers don't work well. I can't disagree with what I saw. I ordered the Taylor from Amazon and Ace Hardware. I would like to pass on this. Taylor was under $13.

👤I bought this because of my frustration with my oven. The oven in my apartment is not good. I was suspicious that it wasn't as hot as I thought. I like to cook and this isn't a big deal if you just throw a frozen pizza in the oven. I feel like my oven is cheating on me. I had to catch it in the act. I've been making bread a bit over the past year. I know how to do my research in the kitchen. I buy all the right flour and yeast, gauge the humidity of the room when rising the dough, hide my sourdough starter in a spot under the bed where the dog and my missus can't find it, and discover it two months later when I flip. I end up with cakey bread after all that work. It's not good for eating, but it's good for opening the fridge door when I'm stacking groceries. I'm pretty sure there's a line in The Fellowship of the Rings where Sam complains about it. There is a I decided that I am a crummy baker or the oven is the culprit. I bought a thermometer. My oven does not work well. Chicken parmigiana, goodbye, delicious, and hello salmonella! It was a carefully scheduled 7:30pm dinner and an apology at 8:15pm. I haven't tried baking a loaf since I bought this thermometer. It's helping me to regain my faith in my ability, like a private investigator who assures you that you're not paranoid. I can't divorce my oven, but I can keep it honest. Highly recommended.

👤First use over the weekend. Put it in a smoker. Before checking temp, let it heat up for a while. Digital had it at 220. This was read 180. It was bumped to 235. This barely moved. Then popped it to 250. The thing peaked at 200 degrees. It seems to be useless. I would go through the trouble of returning it if it were more expensive. Please send me another unit to compare if the seller thinks this is a bad unit. Thanks.

👤The lens will melt at high temperatures. The product was great.

👤The cover fits perfectly, and the thermometer feels nice. It takes forever to read the temperature. I had to hold it and it got very hot. I like how it is dishwasher safe. I feel like I'm protecting it. I have had this for a few weeks now and I am realizing that it never gets over 120, even when I know the meat is well done. I wouldn't recommend anymore. I'm taking my star away.

👤It's important to have an Inexpensive item in your oven, especially when the oven only displays desired temperature and not the actual temperature. I used this item to figure out why oven baking wasn't working correctly. The oven wouldn't maintain the temperature if it wasn't getting hot enough. With this device and the replacement of the temperature sensor, oven use is spot on.

👤Since everyone's ovens are different, I didn't know I needed this affordable thing until I saw a baker tip on the internet. I am happy I did because I always had issues with my bakes in the oven. Why? My oven was 50 degrees cooler than the dial said it was. The first one I received had a crack in the glass and they replaced it for free.

👤I have to get my reading glasses out and kneel on the floor because the print is so small. It seems to be more accurate than the one it replaced. The print is red from 300 to 400 so it is helpful, but it is hard to see what the temperature is.

👤I wondered if my oven was heating up to the temperature I had set it to when I started cooking. It was on my mind and I bought it. I wish I did it a long time ago because my oven isn't heating up right. I can be confident in the oven's temperature with this thermometer. This item is used to check the accuracy of your oven. The price is around $2.50 with tax.

👤I bought this because I wanted an extended lower range. It's very inaccurate. This thing reads about 280 degrees when my oven is at 350, and it was all within 5 degrees. I gave it 30 minutes to catch up if it was a slow unit. Junk. Don't buy it.

👤I baked everything in half the time I was supposed to, which resulted in some burned cakes. I bought this little guy because my oven runs hot. I'm pretty sure there's something wrong with the temperature regulator, but until I can fix it, this is the perfect solution.

👤This was used to check the oven temps of the new range. They both read the same temp. I would trust that the readings are accurate, even though that doesn't confirm it. To reach the same internal temp as the oven, you need to warm the thermometer up long enough.

👤I have never been able to make cookies that were soft and flat. My cookies used to be like huge mounts with dark bottoms, but I would follow a recipe. I only found out that my oven was off by 25 degrees after I bought the thermometer.

👤Pourrais avoir des chiffres plus facile a lire.

👤I don't know if the temperature is accurate or not, but I can tell you that it is impossible to read if you use Celsius. You would need a magnifying glass.

👤The product works well.

👤There is money stuck in a waist position and it is shaking.

👤It was good while it lasted. I used a lot at the beginning. Only from time to time. I was given the battery indicator that the battery needs to be replaced. I tried to replace the battery with multiple batteries, but nothing came of it. I was almost relieved to find out that it has a 2 years warranty. I'm out of warranty until I find out. The original battery lasted almost 2 years. I used it very little. I was disappointed that I couldn't replace the battery without it breaking. I couldn't find any cables that were loose. It died. For under 20 dollars, I should have been happy, but for the amount of time I used it, I'm disappointed. I will look at other brands and see if I can find something that lasts a bit more.

👤I was happy with the item at first. When it was time to replace the battery, it would no longer work. I tried several new batteries and nothing worked. I tried the old battery again, but nothing. Reviewers have stated similar problems. I have to buy a better unit because this item is disposable.

👤Not sure about the accuracy. I wanted to check the temp for pizza stone. They recommend checking the temp of the stone and dome with one of these. I put ice water in my yeti cup. It read 32.9 after a few minutes of sitting. After a few more minutes, I check it again. I checked it from 12” away, which should measure a spot roughly 1” diameter, according to the instructions. A cup opening of 4” should suffice. It settled in at 33.9 several times. I can live with that on the low side. I boiled water to check the bench mark. Same thing. I moved it away from me. It was different every time I checked it. The water had barely reached boiling point when I turned down the stove. Same thing. Never the same twice. Sometimes it might be 15-20 degrees. I wish they included some steps or ways to make sure it's accurate, like ice water or boiling water. Some will say that it is only a few degrees off. Since the whole point of measuring the temp is to be as close to exact as possible, 15-20 is more than a few. I can guess at the temp without this device. It is too hot if your pizza burns.

👤I bought 2 of these handy bad boys because they sounded like a cool thing to do, but I wasn't sure what I'd use them for. I've used this device almost everyday. I insulated the compressor pipe on the outside of my house because I wanted to make sure my pizza was safe to eat without getting pizza palate. The temperature difference was seen with and without the insulation. A friend is borrowing it for AC issues. Just buy this. I bought one for my dad and grandpa.

👤The dual laser is worth a few extra dollars, because this thermometer really works. By using two lasers, you can not only aim the thermometer, but also gauge the distance and spot size, so you know exactly how much area you're averaging. The best result is recommended by the unit's documentation and label, which is 14 inches. I found this one to be very accurate. It feels like a much more expensive instrument because of the details. There is a delay of just under a second while the device calibrates and then the lasers and backlight come on. The display shows the current spot temperature and the maximum so far. If you don't need the lasers or screen backlight, you can turn them off, and the display will hold for the right amount of time after you release the Trigger. It's great that it's instantaneous and there's nothing to clean after, but it's educational to walk around your house and measure the temperature of ordinary things. You would be able to spot issues if you know the temperatures. Is the fridge at the right temperature? What is the temperature on the stove?