The family's best gift would be the IR Thermometer, which can be used for cooking, barbecue, car repair, home maintenance and repair, or other household tasks. This product can be used safely for high temperature, toxic or difficult to reach objects. It is the best aid for cooks and gourmets, providing better assisted living for everyday life. Laser temperature gun has an object distance of 12:1 and can measure targets at a longer distance. In less than a second, high quality sensors can be used. The measurement accuracy is 1.5 C, which is suitable for most daily life. Household, industrial widely used. The temp gun temperature range is -50 400 C (-58 752 F) for engine, tires, electrical equipment, heating and cooling equipment, and other measurements. The laser temperature gun can be used to measure the temperature of hot water and oil in life. TheIR thermometer gun mode switch button to switch between MAX/MIN/AT/EMS/CAL mode, MAX: display the highest temperature during measurement, MIN: display the lowest temperature during measurement, AT: automatically display the current ambient temperature. Cal: temperature self-help. The operation display of the IR Thermometer is a large display with high stability and backlit display, which can read values in the dark, just press the measurement button to start. The RIS400T Laser Thermometer Gun, 2 1.5VAAA batteries, and an English manual are what you get. Get 100% satisfaction or get a replacement! 30 days no questions asked return policy and one-year warranty are included in the price. It was worth it.
👤I bought this to measure the temperatures in my reptile enclosure. Just point and press, it's very easy to use. It's much more precise than a thermometer.
👤Great little device. The aaa batteries were installed in a snap. I was worried that it wouldn't work as well as the more expensive models, but it did! I bought this to make sure I am using the right amount of shade fabric. I tried it out in the house and was surprised by how quickly the reading changed, no delay, just reading temps with my movement. I will be using this for cooking, making sure the pavement is not hot to walk my tenants dogs, and my daughter is thinking up all the experiments she can use it for. I am very happy with my purchase. Ps. The bright red dot makes the kitten happy.
👤I didn't get a instructions book. I need a good reading but this is all over the place and I don't understand why. I shoot it, get a reading, and do it again. It's a different reading. I don't know if it's me or the settings, but I didn't get a book. It seems like a good product, but the complaint with me is that there is no instructions book. I'll hit you "pipe" and see if there are any videos out there on how to use. Maybe I'll find one.
👤The thermometer is easy to use. I can't really judge the accuracy of the product without an actual standard to compare it against, but it does compare very well to other old analog oven thermometers. Its reading is usually within a few degrees of the analog versions. I don't know if the IR and analog versions are correct, but a 5 degree variation is acceptable to me. You have to be careful in aiming it to make sure you are actually measuring the temperature of your target, but that is normal with all IR thermometers. The bottom line is that I like it, it works well, and I am happy with my purchase.
👤I have a gun in my office. This one was for the house. I know these products are similar so I chose a cheaper one. This one has 7 different modes and a backlight. This is more than I anticipated. I am happy.
👤This is a great Thermometer. It works well from a good distance away. It seems to be accurate as well. I used the same Thermometer as my friend and they both recorded the same Temp. I would recommend this product to anyone.
👤The thermometer is small and comfortable to hold. It is important to calibrate the device. I used ice water. In my experience, the reading can be a little bit inconsistent but it only varied. You will have to learn how to calibrate and understand the different adjustments. The instructions are not clear, but you should be able to figure it out with a few minutes of playing. You get what you pay for. This isn't a top line precise model, but it is enough for basic uses.
The Kizen instant read meat thermometer is gift ready and can be used to cook up the best surprise for the chef in your life. It's a must-have item that can be used for a lot of things. Not for human. The temperature of an object can't be measured with the thermometer, it's not a real object, and the temperature for humans or animals will not be correct. The lasergrip 1080 can measure targets at greater distances than most other IR thermometers, and for best accuracy, the distance between the thermometer and object of measurement should be 14.17 in. The target is quick. The unit can be used to measure surface temperature from -58F to 1022F/-50C to 550C. There are added functions. The screen is backlit, has an auto-off function to extend the battery life, and has a low battery indicator so you never run out of juice. TILE DESIGN: It's possible to measure the surface temperature of various objects, especially temperatures above boiling points and below freezing points.
👤It was good while it lasted. I used a lot at the beginning. Only from time to time. I was given the battery indicator that the battery needs to be replaced. I tried to replace the battery with multiple batteries, but nothing came of it. I was almost relieved to find out that it has a 2 years warranty. I'm out of warranty until I find out. The original battery lasted almost 2 years. I used it very little. I was disappointed that I couldn't replace the battery without it breaking. I couldn't find any cables that were loose. It died. For under 20 dollars, I should have been happy, but for the amount of time I used it, I'm disappointed. I will look at other brands and see if I can find something that lasts a bit more.
👤I was happy with the item at first. When it was time to replace the battery, it would no longer work. I tried several new batteries and nothing worked. I tried the old battery again, but nothing. Reviewers have stated similar problems. I have to buy a better unit because this item is disposable.
👤Not sure about the accuracy. I wanted to check the temp for pizza stone. They recommend checking the temp of the stone and dome with one of these. I put ice water in my yeti cup. It read 32.9 after a few minutes of sitting. After a few more minutes, I check it again. I checked it from 12” away, which should measure a spot roughly 1” diameter, according to the instructions. A cup opening of 4” should suffice. It settled in at 33.9 several times. I can live with that on the low side. I boiled water to check the bench mark. Same thing. I moved it away from me. It was different every time I checked it. The water had barely reached boiling point when I turned down the stove. Same thing. Never the same twice. Sometimes it might be 15-20 degrees. I wish they included some steps or ways to make sure it's accurate, like ice water or boiling water. Some will say that it is only a few degrees off. Since the whole point of measuring the temp is to be as close to exact as possible, 15-20 is more than a few. I can guess at the temp without this device. It is too hot if your pizza burns.
👤I bought 2 of these handy bad boys because they sounded like a cool thing to do, but I wasn't sure what I'd use them for. I've used this device almost everyday. I insulated the compressor pipe on the outside of my house because I wanted to make sure my pizza was safe to eat without getting pizza palate. The temperature difference was seen with and without the insulation. A friend is borrowing it for AC issues. Just buy this. I bought one for my dad and grandpa.
👤The dual laser is worth a few extra dollars, because this thermometer really works. By using two lasers, you can not only aim the thermometer, but also gauge the distance and spot size, so you know exactly how much area you're averaging. The best result is recommended by the unit's documentation and label, which is 14 inches. I found this one to be very accurate. It feels like a much more expensive instrument because of the details. There is a delay of just under a second while the device calibrates and then the lasers and backlight come on. The display shows the current spot temperature and the maximum so far. If you don't need the lasers or screen backlight, you can turn them off, and the display will hold for the right amount of time after you release the Trigger. It's great that it's instantaneous and there's nothing to clean after, but it's educational to walk around your house and measure the temperature of ordinary things. You would be able to spot issues if you know the temperatures. Is the fridge at the right temperature? What is the temperature on the stove?
Customer first, 100% money back within 60 days and 18 months, great gift with this BBQ thermometer for kitchen beginner or food enthusiast. The temperature readings from these devices are not for humans. The temperature for humans and animals will be incorrect. The distance between the object of measurement and the thermometer should be approximately 14.17 inches. The target is quick. Measure surface temperature from -58F to 716F, with 2 units F/C to choose, and a built-in laser gives you the precision to hone in on the exact space. TILE DESIGN: It is possible to measure the surface temperature of various objects, especially temperatures above boiling points and below freezing points. The color model doesn't have the emissivity adjustment feature and max temperature feature. There are added functions. The screen is backlit, has an auto-off function to extend the battery life, and has a low battery indicator so you never run out of juice.
👤I ordered a dual pack of these inferred temperature guns. You can see that the one on the left is over 200o and the one on the right is the correct temp.
👤Every home should have this handy little tool in their toolkit. It is worth the money for the entertainment value alone. It can be used as a cat toy. Startle your housemates. The opening sequence of James Bond. You can also take the temperature of things. I couldn't imagine what I'd use this thing for until I got it, and then I was using it for everything. If you want your cooking to be more accurate, you should use exact temperatures. The floor in the bedroom is warmer than the rest of the house. Don't argue with your girlfriend about how cold her hands are. The body is not heavy duty, but it is durable. It has a slightly textured feel to it, which eliminates the "cheap plastic" feel. It feels good in the hand. The display is easy to read and bright, with the option to turn off the backlight, turn off the laser, and turn the read out between C and F.
👤I do a lot of work on my home and vehicles, but I am not a professional mechanic. I bought this as a homeowner to use it to verify hot/cold spots around my home. To measure temperature differences between my supply and return vent. It will be used when grilling or smoking. I like to build PCs and an IR Thermometer is a must have, but I wanted a tool that was moderately priced and performed well for my use. I decided to go with the best seller on Amazon, Etekcity 774, which is the most reviewed and affordable IR Thermometer on the market. I found many different options that offered different ranges, features, and spot/distance ratios, with 12:1 being the higher standard and what most higher end brands have. There is a The model #s do not show which models are higher end. There is a very confusing model numbering. One would think a model # of 800 or 1022 would be a higher end than a 630 or 774. Not the case with Etekcity. Combine this with the fact that you can't side by side compare on Etekcity or Amazon. I narrowed my options to 3 and took a test. I compared the Etekcity Lasergrips thermometers with the Klein IR1000. I use spots next to my home thermostat and at fixed distances on certain surfaces. Regardless of which IR thermometer you choose, Etekcity makes excellent products, and their customer service is amazing. I had a lot of questions and the Etekcity customer reps were able to open a chat with me. They helped me understand the advantages and differences of their IR thermometers. A lot of higher end IR thermometers in this category are well over $50.00 and do and share the same features and quality that I learned from Etekcity products. The Etekcity 1022D is priced at $19.99.
A 9V battery and a custom pouch are included. It's versatile and handy for instant temp readings, but not suitable for human body temperature. The temperature range is -50C to +400C /-58F to 752F; Accuracy is 1.5% or 1.5C. Keep your hands safe in this fast and safe way to measure temperature. The backlit screen has an auto shut-off to extend the battery life. Power and warranty. It has a 2 xAAA battery. The U.S. FCC was approved. One year warranty.
👤A small device that checks the temperature of my soaps while they are being processed. Thanks to Deb.
👤It seems to be accurate for my purposes. I bought this to use in my enclosures to monitor their basking temperature and coolness. The readings make sense when I look at different parts of the enclosure, and the temperature changes in a predictable manner. I don't have to worry about wasting batteries because it has been easy to use and turn off. I don't know how to measure its accuracy, so if you want to be perfect, you may want to do more research. It was a good buy for me.
👤Cheap china junk that doesn't turn on. It's a waste of time and money. I paid good money for the insult of being toxic landfill garbage. Being honest.
👤I was surprised at how well it works. I made some comparisons with other sources and this seems to be correct. It works well for monitoring the temp of an AC fan motor.
👤The title is misleading because the product doesn't take internal temperatures of your body and it won't take the temperature from your cooking meals. It has nothing to do with the kitchen, but you can take the refrigerator temp. I'm giving this seller a one star because he's misleading and useless in the kitchen, and I'll remove that misleading title for sure.
👤It is easy to use. It's great to check the temperatures when making soap. It is also great to check the pool temperature. It arrived very quickly.
👤In the event of a power outage, I bought a food temp tester. Works well!
👤The beam is not straight, you have to aim for the area you want to check, and it goes far off the right.
👤No segura de sea tan preciso. Adems de la calidad est un poco sencilla. Me gusta sea de pilas porque puedo usar pilas recargables.
You get a hassle free 12 months warranty and a 1xInfrared Thermometer. The high accuracy is listed. The instrument reads values of high accuracy up to 2% in only 0.2s thanks to the advanced lens and temperature sensor technology. You can measure the target at a longer distance with the 12:1 distance to spot ratio. TILE DESIGN: Industrial and daily temperature measurement can be done with the help of the Infrared Thermometer. It is not possible to measure human forehead temperature or animal temperature. A red laser is used for aiming. A red laser for precise aiming, and a large screen display for clear reading are some of the things that make the user experience higher. The internal temperature range is -50 C to +300 C / -58F to +572F, and can be measured with a free meat thermometer. 15 minutes turn off automatically. It is the best cooking aid for chefs and gourmets. The best gift is the ability to use the Infrared Thermometers in various fields. This product can be used to measure objects that are hard to reach. Lifetime after-sales service is provided by them. If you're not happy with their products, please contact them and they'll give you a replacement. The old product doesn't need to be returned in order to ensure that every buyer gets a brand-new product.
👤I was surprised at what the product could do. You can program the thermometer to read different levels. If you are taking a reading on an engine, your ems level would be around 95, but if you are taking a reading on skin you would change it to 35. You can only find a chart like this in higher priced guns and it has a bunch of different objects. I use mine to check the temp of my ski motor when I am out riding, and to test the heat of my ski motor when I am in the shop. It works well and you can't beat it. If this review was helpful, please mark it as helpful. It's a good thing.
👤Accuracy is important when grilling, this is a very good product. You have to know the temperature of the grill. Eggs cook at 250 degrees while bacon cooks at 350 degrees. The gun will tell you when the grill is at the right temperature.
👤I bought this knowing that some people thought it was incorrect. I got changes too much with the unit. I thought I might be able to compensate by just adding or subtracting the temperature difference. Each time I measured the same object, it would come up different in either direction of the initial reading. I am sending this back and ordering a different one. If I spend more money on a different brand, I might find a better quality unit. I figured out how to make the temperature more accurate. If the item or area you are measuring doesn't match something on the list, you can't know if it's accurate, unless you use another device to tell you the real temp. I use an IR reader to check temp fluctuations on my 3D printer. I can use the temp reading on the printers to calibrate it to the type of printing surface I am using. I raised the rating to 3 stars because of that. It works like it is proposed to. If you don't know what settings you need for different items, you may face some inaccuracies. I don't think this will be like a normal temperature. You have to work with it to get consistent accuracy. You are not going to just be able to point and shoot the laser at anything and everything and get decent accuracy without some adjustment.
👤I check the temperature of my food at the beginning of every shift as a restaurant manager. I bought this handy device because I was using a thermometer that was difficult to use when the equipment failed. The included meat thermometer is very accurate when I'm checking the temperature of food products and the device is terrific when taking surface temperatures from our grill tops. You have to research emmisions so that you can adjust your settings. There are many tables that can break that down for you. You will find a great device once you figure that out. It saved a lot of time and would definitely recommend anyone.
The RIS400T Laser Thermometer Gun, 2 1.5VAAA batteries, and an English manual are what you get. Get 100% satisfaction or get a replacement! 30 days no questions asked return policy and one-year warranty are included in the price. It was worth it. It's not suitable measuring human temperature, so it's not suitable for Instant Temp Readings. The temperature range is -50C to +400C /-58F to 752F; Accuracy is 1.5% or 1.5C. ACCURACY: Excellent. The laser grip can measure targets at greater distances than most other Thermometers because of the distance to spot ratio. Function: The screen is backlit, C/F setting is more convenient for testing, and there is an auto-off function. The battery is included. Also, note: The temperature readings from this laser are not objects. It is not appropriate to use this product for humans or animals.
👤I use this to make soap. It is easy to use. It's fun to check the temp of random things. For the sake of making sure my oils and lye solution are within a certain temperature, I haven't done any specific tests to determine accuracy.
👤I can't speak for it's longevity, but it seems to work well for me. Can't beat it for the money as long as it holds up over time.
👤This is a useful tool. I bought it to check the temperatures of various materials. Our current Trex deck hits 140 degrees on a warm day, while some types of wood hit 170. Light bricks are about 10 degrees cooler than dark bricks. This helps me realize how much warmer some outdoor wear can be than others. I verified that our home's A/C system has a nice 22-degree temperature drop, and that our grill temp gage is accurate. I think this is off by a few inches at a 3-foot range. I put a hot mug of coffee on the floor and "lasered" it from a distance. I could tell the laser was pointed too far to the right by moving it to different spots on the coffee's surface as well as the floor. There's a label on the gun that says a widening sensor area as things get farther away. I thought that implied the gun took an average across that diameter, but I think it's reading a small point within that diameter, which is more accurate than ignoring the laser and looking straight down the line on top of the device. The laser shoots to the right. I've had times when I thought this read low by a few degrees, but it's still within the range noted in the tolerances. I have a few digital thermometers that read very close to each other and I'm a bit obsessive about temperate around the house. I put two of these on a shelf and then used the laser thermometer to check the temp. They both read near 72.0F, but the laser read around 69.5F. I got a more accurate reading after doing the same measurement. It works well for my needs.
👤I bought a thermometer because some of the equipment I use is not functioning properly, but it wouldn't give me a proper reading. I bought a less expensive one and it worked better than this one. I couldn't get a reading past 80 on the first day of purchase.
👤Just got. Stunned by the quality. It took 10 seconds to get the batteries in. Simple controls. One button for the laser. This also turns off the sound of a bell. There is one button for the light to come in. Pull the gun. Release on stable temp, which will hold until automatic off. The family room is very cold. The temperature is 70F. I get 70F within a few tenths. Absolutely great price. There is a place of honor in the kitchen. My first 5 stars for everything.
Satisfying service is 100%. Every product sent to you has gone through a series of quality inspection processes. If you have any questions before or after purchase, do not hesitate to contact them. Highly accurate: Designed with the latest thermopile sensor technology, to allow the ir gun to provide the highest accuracy up to 1.5%; and improve the accuracy of the ir gun by adjusting the emissivity from 0.1-1.0 according to the surface material being measured. With a distance to spot ratio of 12:1 and a response time of 500Ms, this allows the temp gun to provide the most accurate temperature readings of any target even at great distances. The heat detector can measure various objects' surface temp from a safe distance, thanks to the technology of the Pyrometer. The termometro digital displays MAX/MIN/AVG temperature of the last scans, perfect for measuring AC vents or car engines, and the thermal gun has a backlit screen that automatically shuts off after 90 seconds. When the low battery indicator remind you to change the battery, it's easily replaceable, and the temperature gun is powered by two powerful and commonly found batteries. Also, note: The digital Thermometer is not designed to take Human Body Temperature.
👤I bought two of them because I like my ThermoPro TP-08S and I expected it to be a great product. The warranty was a factor in my decision. I opened one and put it to use, comparing it to my Etekcity Laser Grip. The first marked difference is the smooth sureface of the TP30 case compared to the Laser grip. The batteries they take are different. The name of the product is ThermoPro. The laser grip is called the Laser Grip. 9v. The feature is the last. Etekcity Laser Grip 1080 does not have it. I use my laser grip in the kitchen to check skillet temperatures before cooking eggs and steaks. It's important to make sure my cast iron pancake griddle is at the right temperature. Depending on where you set the emissivity on the ThermoPro, the temperature reading between the two can be as much as 20F. I don't think this is a good idea to play with an emissivity feature. A procedure to calibrate the unit would be nice. I'm considering sending the TP30's back for a refund.
👤This gun works well for our pizzas in the wood-fired oven. We need to know the temperature of the stone and the interior of the oven in order to get a good crust. This unit does it.
👤I used a $500 tool 20 years ago when I was pulling tools on equipment. That one did not have an Emissivity adjustment. This one does. This is a good way to make money. The IR heat gun only sees shades of grey. Each shade of grey has a slightly different Emissivity. That's a funny word that means the combined energy. We want to see surface heat. The IR gun can read three types of heat. The true temp of an object is distorted by this. You know that the heat is reflected or absorbed. White and silver are hot. The heat is absorbed by dark colors. Even if you get the Emissivity setting correct. The heat is changed by the distance from the object. Your reading will be a bit off. The reading of the heat gun is affected by two variables. If you get within 5 degrees of the actual temperature with an IR heat gun, you are doing well. This is the best IR gun I have found in a long time. The heat is averaged in the area. The closer the better. The circular area tested is about 2 cm. The field is 3 cm at 36 cm, and it keeps growing. The iR gun averages the temperature in the field to calculate accuracy, so the farther away from the object the better. This tool is still useful. I used a heat gun to narrow down the problem. I found a heat gun useful. When things fail, they get hotter or colder than a similar part. I used the heat gun to compare two temperatures instead of looking for an exact temp. My expensive one was always a few degrees off. When oil passes the piston, the cylinders get hotter. The cylinder temps were compared to the bucket loader drift problem. The hotter one isn't being taken advantage of. Poor contact causes electrical connections to get hot. The exhaust manifolds can be checked to see if there is an engine miss. The problem might be the cold one. A neighbor lost power. I used my old heat gun to check the outlets. I found one hotter than the others. The outlet cracked when I pulled it apart and the wires came loose, which caused the outlet to melt. A heat gun test can use brakes and wheel bearings. I convinced the quarry maintenance department to check the conveyer belt roller temps. It became a daily check to find the bad rollers and change them on down time, instead of in the middle of the day, when 20 trucks are waiting to be loaded. The heat gun only gives a temperature of solid objects. Air, water, and Ice will not give a true temp with a heat gun. That's the Emissivity thing. When you have a problem with something, it's a good idea to check the temperature of the parts and look for one that is too hot or cold. This is a small heat gun. An IR heat gun in this price range won't be very accurate.
The IR temperature gun is not for humans. The laser temperature gun can't measure the internal temperature of an object, so do not irradiate human eyes directly or indirectly. The high IR temp thermometer has a distance spot ratio. The accuracy of the +/-. It is possible to measure temperature from greater distances than others. The emissivity can be adjusted to improve the measurement accuracy. The unit can be choose from C/F or F, it can measure surface temperature from -58F to 1292F. You can measure the temperature of the target only at greater distances with the response time of 500msec. You will get the MAX/MIN/AVG/HAL/LAL temperature display if you press theMODE button. You can set up an alarm for MAX or MIN to keep your safety, 10 seconds auto shut down without operation to save your battery, and you can read the temperature even in low light areas. The laser temperature gun can hold 7s for you to record. It can cover temperature from the kitchen to the automotive systems. The battery is included. You will need a 9V battery to get started. The digital laser IR thermometer can't measure the temperature of the object, but it can measure the living object.
👤It seems great so far. It works perfectly, and with a 16:1 spot ratio, it's the best you can do for a product like this. 100% endorsed!
👤The 980G version had a 9V battery and advertised a 16:1 distance spot ratio. It seems to do the job. After 30 days, there have been no issues or complaints. It is helpful to have a basic item. I bought things on Amazon and eBay. The model was selected because of the advertised spot ratio. The 9V battery might be better than the 1.5V batteries.
👤It's the best value out there. The backlight is bright. Every feature you would ever need is there. Just buy it.
👤It's cheap, but it's accurate and comes with a battery, I don't like the auto off function or the fact that you have to press the Trigger once to turn it on and again to start measuring, it also feels cheap.
👤When it was new out of the box, it gave a non-sense readout. Multiple battery brands tried, but all the instructions were followed. Only buy it if you use it once, out of the box. Otherwise, waste of money.
👤It's very inexpensive with a lot of options. It's easy to use the 9volt battery.
👤It was what I needed for my welding job. I make steel up to 2 inches thick. I heat it up to 150 degrees. Thank you.
👤I had to place the battery in and begin using the thermometer, but it is very accurate and easy to use.
Also, note: The temperature readings from this laser are not objects. It is not appropriate to use this product for humans or animals. The optical resolution of the Thermometer is 10:1. Features include targeting laser, automatic hold, backlit display, and low battery. Drop protection to over 6 feet. The range is -4 to 752-Degree Fahrenheit. The thermometer is not intended for use on people or animals. The emissivity was fixed at 0.95. A 9V battery and a custom pouch are included. A 9V battery and a custom pouch are included.
👤I tried to measure items in my fridge and the side walk on a hot day, cookie sheet out of the oven, and freezer items. The model was off by about 5*F in the test if the other two are correct. I don't know if the other two are correct or not, but they both were within 1*F of each other. I have a dial thermometer that I use for the freezer and fridge measurement. I understand that not all objects will measure the same temperature. I was hoping the IR thermometers were close. I will leave a 3 star until I find a reliable device to take the measurements and compare. There was a pouch to hold the items.
👤It says it includes 2x AA batteries. The link at the end of the description takes you here. I need this right now to verify a hot plate.
👤The Klein IR1 was 888-282-0465 and I tested it against another IR thermometer. I agree with my thermostat setting. The Klein seemed to be reading about 5 degrees F low, which is a large percentage compared to the advertised 2%. I'll stop there when I find out how accurate a thermometer is. Returned it.
👤This should be in the sub $20 category for what you get and the other quality name brands out there that do more. The 10:1 is fine, but my temperature wouldn't read over 200. The upper temp is 400C so be aware, but when my heat nozzle temp was set to 435 C, the reading wouldn't climb over 203, so I knew there was an issue. The battery cover has a screw that must be removed to access the C/F switch. It is too bare for the money. It doesn't affect my review at all because I base my reviews on the product performance and not things like missing parts or shipping boxes, but the battery was DOA. I was given money back by Amazon for the replacement batteries I had to run out of, but now it looks like they are removing that discount, which is wrong to me. This is a mediocre unit and I wouldn't recommend it. For around $10 more you can get models with dual lasers, better distance ratio, temp alarm, and C/F switch on the buttons, as well as emissivity adjustments for different materials. I would say that is an indication that the unit is overpriced.
👤Good quality. It seems to be correct. The price range for other infrared thermometers can be as low as 15-20 degrees Fahrenheit. This one seems to work at a range of six feet or so and can register temps within a few degrees of actual. There are other units that are cheaper. I have faith in the Klein name and this is justified.
👤This is a good temperature to use at work. It's accuracy can change from day to day. It was useless in a professional setting. I wouldn't use it for rough estimates of temperature. There is no way to calibrate it because it reads too low. I have placed it next to traditional and multiple other modern thermometers with only one occurrence of it reading right. Even tried multiple battery chemistries and still got the same results. Returning.
The temperature can be measured in both daily and industrial settings with the help of the versaTILE thermometer. It can be used to perform auto/motor maintenance, home repairs, and more. There is a backlight. You can see the temperatures in the dark. If you forget to turn it off, battery saving auto-off will keep your battery alive. The temperature gun is widely used in measuring the surface temperature of inaccessible objects. The built-in laser helps to position an exact area of the target object, which makes the thermometer more accurate. Hold the gun for a few seconds to get a more accurate reading. The IR thermometer gun has a low battery indicator and 30-second automatic shutdown function. The temp gun's emissivity range is 0.1-1.0, which allows to adjust the emissivity according to different materials for the most accurate area measurement. The IR temperature gun is not for humans. The laser temperature gun can't measure the internal temperature of an object, so do not irradiate human eyes directly or indirectly.
👤I bought this gun to double check my aquarium temperatures and to check plant leaf temperatures. To begin, I put masking tape on the side of my aquarium to make sure I'm getting an accurate reading. It takes some time for the temperature gun to find the right reading, it isn't instantaneous, but I was amazed to see it agreed perfectly with my digital thermometer, which is 80.2 degrees. It worked well for leaf temperatures, which are important to monitor when using indoor lighting. A lot of people wrongly think that their plants have all sorts of calcium and magnesium deficiencies because they don't need to bring their leaf temperatures up to 80 degrees. The gun is highly recommended.
👤The device is easy to use. It's accuracy is less than 5%. The only thing I don't like about it is the beeper. I clipped the case out after I got the case open. I used to operate a lab-grade microscope that had a fixed emissivity of 1.0. It needed to be cooled with liquid Nitrogen to get readings at room temperature, but seeing something like this is amazing. To get good readings, you need to be able to use the emmisivity setting. If you want to see what the temperature is in your oven, put a cast iron skillet in it and let it cook for 30 minutes. You can get a pretty accurate temperature reading by focusing the laser beams on the skillet. Most ovens are not accurate. The oven was actually 330 F, which explains why cake mixes took longer than normal. The error can be non- linear if the oven was at 450 F. It's fun to play around with it. The technology used to cost $100,000 and require liquid Nitrogen.
👤The piece was tested against many higher priced items. This is a must have tool for leaf surface temp checking. It can burn with light or not have enough heat.
👤The item was well packaged and arrived on time. The point and shoot work well. I use mine to get the temperature off a pizza stone.
👤Can't go wrong with inkbird products. If you're in the market for one, I'll buy it again. They are a great deal. The garage man cave is the 3rd picture. I connected it to the inkbirds temp controller so it will kick the heater on when the temp is right. I used the IR temp to measure the temp probe on the controller. You can't tell since it only displays a 6.
👤The house is at 73F degrees and it shows within a half degree of the actual temperature. I filled a glass with icewater and it showed 34.5F, which seems reasonable to me. I'm not sure I could recommend this for critical applications, but I would say it's fine for general use around the house.
👤This is the same product I've used before and it works. No setup is needed to use the non-contact thermometer. I used my inkbird probe to check its accuracy and it was within a whisper of the temperature I was cooking at.
Power and warranty. It has a 2 xAAA battery. The U.S. FCC was approved. One year warranty. The best laser Thermometer needs to be as accurate as possible. Adding 12 built-in laser pointers to maximize the distance-to-spot ratio to 12:1 is what the Acegmet Infrared Thermometer takes into account. There is no need for people to stand around waiting for temperature readings to show up on the display because the thermometer can complete most measurements in less than a second. Its accuracy is within 2% with a measurement range of -58F1012F. No matter what surface you are working on, this is an emissivity-adjustable temperature sensor that will give you more accurate readings. The temperature gun that has a variable emissivity setting will be more accurate as you can calibrate it for each surface you are measuring. You can change the emissivity to the best setting for the surface you are trying to measure. It is ideal for performing quick checks of temperatures from a distance when the object's heat is too high to get close, the target is out of reach, or when a probe thermometer cannot be used. This gun is perfect for any mechanical, automotive or heating, ventilating, and air conditioning repairs. It is easy to use and precise and you can measure the temperature in tight spaces. The alarm function is unique to this gun. You can set a minimum and maximum value for specific objects. An alarm will go off if the temperature is out of range. You will know if something isn't at the right temperature. No matter what you are aiming at. The details allow you to use the thermometer for almost anything. The sturdy build of the Infrared Thermometers will last for a long time. Even if you have delicate hands, it has a comfortable grip. All of these features are available at a low price, and the IR temp thermometer is a great choice. It's the best bang for your buck. They offer an 18 month worry-free warranty and lifetime technical support if you buy now. If you have any questions, please contact them.
👤There are a lot of Infrared Thermometers on the market. I decided to buy a cheaper one. I use a small dial packet temperature to measure the accuracy of Laser one. When I tested the temperature of the copper pipe, I was surprised. The reading is closed, 82.4F(k1 type) and 83.8F(Infrared). Ambient temperature reading 80F and 81.9F are the next tests. The test result is good enough for me. I feel confident using theInfrared Thermometer to measure Superheat, indoor duct and outdoor ambient temperature. Anyone who needs quick reading and accuracy should use this product.
👤The IR002 took a fall and died. I mostly use an IR thermometer in the kitchen or grilling, even though I have workshop uses for it. There are many ways to test a pan. An electric skillet is the easiest to use because you just set the temp and it stays there. Even though hardly any recipes ever quantify what they mean by "hot pan", an IR reader is very helpful, even though I usually cook on a stove. When frying, a 350 F pan is usually just right. When pans get to 425 F, they will smoke or spatter like crazy. The thickness of the bottom makes a difference when it comes to the heat of the pan. It is very helpful to use an IR reader. It's great when grilling or smoking. The tool is better than the one I used before. The laser is bright. You know where you are measuring. The circular pattern is a good reminder that it's reading a cone. Love that. There are a lot of features I haven't used. Looking forward to reading the manual. The IR temperature readout is what I needed, and it is a good price. If you use this on a piece of meat, make sure it shows the surface temperature. This can be useful when starting to cook something. It's good to make sure the temp is correct. If you want to check if meat is done cooking, use an internal thermometer. If butter is at room temperature, you're not guessing by using the thumb smoosh test. Measure it. It's a good idea to check a freezer or refrigerator right after a power outage. If the contents stayed cold, then you don't need to throw it away just to be safe. You don't have to guess if you can measure the temp. If power is out, don't open those doors, but once-per-day is helpful information. Amazon asked three questions about the tool. Is it accurate? 5 stars. It was tested on many things, some of the known temperature and everything matched. 2. Is it easy to use? 5 stars. Point and shoot. The manual is required for some settings. 3. Is there value for money? 5 stars. I used this tool to compare similar items. Features and cost are the best combination. A good tool. It would make a good present for a cook or a handyman. I didn't try the protective case. It's perfect for Father's Day, a birthday, or Christmas. The ideas in this review are useful. Be well. Cook with care.
Baking thermometer gun products from Riswojor. In this article about baking thermometer gun you can see why people choose the product. Etekcity and Papogo are also good brands to look for when you are finding baking thermometer gun.
Riswojor, Etekcity and Papogo are some of the best brands that chosen by people for baking thermometer gun. Find the detail in this article. Sovarcate, Pwwdada and Thermopro are also brands that their products are worth to check.